PD2-6400
Helios High Voltage & Current Meter
www.predig.com
7
Save/Open Configuration
At the bottom of most MeterView screens are two tabs:
1.
Get Meter Data:
This reads the programming of the meter that is currently connected to the PC.
2.
Send Meter Data:
Clicking this button, sends current MeterView programming to the meter.
The configuration file can be sent, or retrieved, from the
directory of your choice. This makes it very easy to program
multiple meters with the same programming. It is also a great
backup utility as well.
Specifications
System Requirements:
Microsoft
®
Windows
®
XP/Vista/7/8/10
Communications:
Onboard USB (firmware version 4.0 or higher),
RS-232 Adapter or RS-485 Adapter
Meter Address:
1 - 247
Reports:
• Data logging: Save as CSV file format
• Configuration: Save as PDC file format or print
configuration
Baud Rate:
300 - 19,200 bps
Configuration:
One meter at a time
Protocol:
Modbus RTU (requires Helios firmware version 4.0 or
higher)
*Note: Windows
®
32/64-bit operating systems
Password Protection
The Password menu is used for programming three levels of
security to prevent unauthorized changes to the programmed
parameter settings:
Pass 1:
Allows use of function keys and digital inputs
Pass 2:
Allows use of function keys, digital inputs and editing
set/reset points
Pass 3:
Restricts all programming, function keys, and digital
inputs
