PD2-6400
Helios High Voltage & Current Meter
www.predig.com
5
QUICK & EASY SCALE & PROGRAMMING METHODS
The Helios can be programmed either via the front panel push buttons or free, PC-based MeterView Pro software. MeterView
Pro is resident on the Helios and is accessed by a provided USB cable, so it is by far the easiest way to program the Helios.
The Helios can be calibrated either by applying a known signal or scaled by entering a desired value with the front panel buttons
or MeterView Pro software. Most customers will use the scaling method because it is simpler and does not require a calibrated
signal source. Selecting the input to be current or voltage is done with the front panel buttons or MeterView Pro software. Once
programming is completed it can be locked with a password.
Free PC-Based MeterView Pro USB Programming Software & Cable
The Helios comes preloaded with free MeterView Pro
programming software that connects and installs directly to
your PC with a standard USB cable, also provided free with
each instrument. This eliminates the need to insert CDs, install
drivers, or download software from the internet. When you
connect your Helios to your PC, MeterView Pro is downloaded
to your PC, the software automatically selects the model you
are programming, and you’re ready to start programming
immediately. Further simplifying the programming process, the
Helios can be powered from the USB port, so no need to apply
external power while programming your meter. In addition to
programming, the software will also allow you to monitor, and
datalog a Helios using your PC. You can also generate and
save programming files for later use.
