PD2-6400
Helios High Voltage & Current Meter
www.predig.com
17
MeterView Pro Monitoring & Datalogging
Software
Not only does free MeterView Pro software greatly simplify
setup and programming of the Helios, it can also be used to
monitor and datalog your process.
Datalog Report
Collected data logger information can be sent to a CSV file for
importing into a spreadsheet program. Below is an example of
one such file. Of course, once within the spreadsheet, much
can be done to customize the data.
Relay Control
Relays can be controlled from MeterView Pro for testing
purposes. This is commonly done to determine whether the
relays are functioning properly. In the
Setup
window, under
Relay and Digital Out Test
you have the option of selecting the
relays you want in an ON state or OFF state and also whether
you want to leave the relays in manual control or to return them
to automatic operation.
• Custom Tags: i.e. Power
• Custom Units: i.e. Amps, Volts
•
Alarm Status Indicators
Plastic Control Stations For The Helios PD6400
PDA2360 Series Control Stations
Model
Description
PDA2360-E
Emergency Stop Button
PDA2361-A
1 Black Ack Button
PDA2364-MRUE
4 Black Buttons: Menu, Right, Up, Enter
The PDA2360 series of plastic control stations provide a convenient way to remotely control devices such as
Precision Digital’s Helios PD2-6400. The PDA2364-MRUE four-position control station mimics the Helios’s four
buttons behind the front panel door: Menu, Right Arrow, Up Arrow, and Enter. The PDA2360-E is an emergency
stop button and the PDA2361-A is used to acknowledge an alarm.
PDA2360-E
PDA2361-A
PDA2364-MRUE
•
Complete Pre-Assembled Stations
•
Normally Open (NO) Spring Return Plastic Bezel
Pushbuttons
•
Trigger Action Turn to Release Pushbutton
(PDA2360-E only)
•
IP65 / NEMA 4, 4X and 13 Rated
•
Four-Position Control Station for Remote Operation
of Helios Buttons
•
Wall Mountable
