UNIK2E230
V2
ENGLISH
ISUNIK2E230v2_GB_10_12.doc
3
1. INTRODUCTION
UNIK2E230 is a universal self-learning control unit especially designed for the automatic control of 230VAC
powered, 1 or 2 motor driven accesses. It is fitted with an innovative self-learning procedure allowing rapid
installation and four trimmers for fine adjustment of the main parameters; force, pause time, obstacle
detection sensitivity and out of phase closing when two motors are used.
The following are available:
- simplified programming, thanks to which the unit automatically performs a learning operation to acquire
running time and determine slow-down setting at 85% of opening and closing runs;
- A professional programming in which the installer can determine the instant in which the gate starts to
slow-down, the enabling of the pedestrian opening via radio, the safety device trigger mode.
2. MAIN FEATURES
•
Management and control of 230VAC (max 400W) powered, 1 or 2 motor-driven automated accesses
•
Motors closing offset adjustable from 0 to 15 seconds using trimmers
•
Opening motors delay settable at 0 or 3 seconds
•
Double limit switch input open close
•
Motor force (speed) adjustable from 50-100%.using a trimmer.
•
Customisable partial opening (for pedestrian transit)
•
0 to 60” stand-by time adjustment via trimmer.
•
0.1 to 3.0” obstacle detection triggering time adjustment via trimmer.
•
Initial settings using dip-switches
•
Signalling LEDs (8)
•
Expansion for electric lock 12V 15W max (optional board ELU, with optional relay)
•
Expansion for courtesy light (optional board LCU)
•
Built-in 433MHz rolling-code receiver with 180 memorisable codes
•
Built-in flashing logic management
•
Flash microprocessor re-programmable on-board via serial interface.
•
Programming and control of the control unit using a portable terminal GTSYSTEM (optional)
•
Built to European reference Directive Standards (R&TTE 99/05/CE)
DECLARATION OF CONFORMITY
Prastel S.p.A. declares that UNIK2E230 IS IN ACCORDANCE with the 99/05/EC (R&TTE) direcitve
The complete declaration of conformity is available in Prastel or to the internet address
www.prastel.it
3. TECHNICAL SPECIFICATIONS
Transformer power supply:
primary230 / secondary 18V 20VA / secondary12V 20VA
Control unit power:
230VAC
Motor output:
2 x 400W
Max current peak of motor:
Max 8 Ampere
Accessories power:
24 VDC - 500 mA protected by fuse (see info page 13)
Environmental operating temperature
:
-20°C / + 55 °C
Programming parameters:
memorised in EEPROM
Functions handler:
microprocessor with watch-dog
BOX IP rating:
IP54
Intelligent Security & Fire Ltd.
