PRASTEL GT+, Руководство пользователя

Страница: 6 / 18

GT+ ENGLISH
ISGTPLUSEN_11_14.doc
6
“Name“ Submenu:
This submenu displays the receiver's mnemonic name.
“Program” Menu:
This menu allows the transmitters to be programmed into the receiver
memory and the receiver to be configured.
An error in communicating with the memory or the receiver is indicated by
the "No memory!" message.
If the installer code in the memory or the receiver is incorrect, the "Inst code
ERR!" message will appear.
If the memory type or the receiver does not support a requested piece of
information, the "Not available” message will be displayed.
“TX code” Submenu:
This submenu allows the transmitter codes to be programmed into the
memory of the receiver. A transmitter code may be entered in two
different manners - by radio transmission from the transmitter or manual
input.
“Radio” Submenu:
This submenu allows a transmitter code to be programmed into
the receiver memory by radio transmission comprising the
transmitter code.
The "Waiting for
transmission...” message indicates that the
GT+ is waiting for a radio transmission from the transmitter.
If the receiver is in default mode, press the transmitter channel
button. The screen of the GT+ will display the transmitter code
and the channel number. In the example to the right, number
12345 was received on channel 2.
If the received code matches this number, it should be
confirmed by pressing OK. Otherwise, press the left arrow
button. The code will be automatically copied to the receiver
memory after confirmation and the GT+ will return to awaiting
transmission mode.
If the receiver is configured in free mode, the number of the
relay to be activated upon receipt of the transmitted channel
must be selected.
The relay number is selected using the up and down arrow
buttons. Once the correct value is displayed, confirm it by
pressing OK. The receiver memory will be automatically
populated. The GT+ will return to awaiting radio transmission
mode to be able to program the next transmitter. Press the left
arrow button to exit the radio programming mode.
If a receiver is in default mode, the transmitter number will be
automatically copied to the receiver memory after confirmation
and the GT+ will return to awaiting transmission mode.
“Manual” Submenu:
This submenu allows a transmitter code to be programmed into
the receiver memory by manual input.
The cursor is placed under the figure which can then be edited
using the up and down arrow buttons. The cursor may be
moved using the left and right arrow buttons.
Parameters
>Name
Code: 00000000
^
Radio
>
Manual
Code: 00012345
Chan.:2 Relay:1
Code: 00012345-2
Confirm?
Waiting for
transmission...
> Radio
Manual
> TX code
Relays
Not available!
Inst code ERR!
No memory!
> Program
Delete