GT+
ENGLISH
ISGTPLUSEN_11_14.doc
16
6. CONNECTION TO WINGTPROG
The WinGTProg program is designed for managing an installation database, each installation being associated not
only with the client details and installation data (date, name of the installer, installed accessories, etc.) but also with
a list of codes and a list of the technical actions carried out.
The WinGTProg program allows the following via USB connection to the GT+ terminal:
•
Maintenance of M200R, M1000R, MM250, MM1000, LOGIC250, LOGIC1000, M200RxP, M1000RxP memory
modules.
•
Maintenance of MR2E / MR4E multichannel receivers.
•
Programming MPS Easyroll 433MHz series transmitters by radio transmission.
•
Transferring data from archives stored in the GT+ memory.
Installing the Software
•
Download the WinGTProg application 1.11 or higher from www.prastel.com
•
Run WinGTProg.exe installation program
•
Follow the installation program instructions
•
Installation will create an icon on the Desktop and another in the “WinGTProg” folder in the program bar
Using GT+ with WinGTProg
Connecting the GT+ to the WinGTProg program is only possible if the GT+ is not in a submenu and if it is
connected to the PC via its USB port.
In such a case, the GT+ will be automatically detected by WinGTProg upon running.
Otherwise the communication needs to be initialized using the “Detect Terminal” function which can be
accessed in the WinGTProg “Hardware” menu or by clicking the
toolbar icon.
The “Memory” and “GTPlus” menus will appear when WinGTProg detects the GT+.
“GTPlus” Menu
This menu provides access to the data transfer functions between the GT+ memory and the WinGTProg
program, and the GT+ firmware update functions.
“File Management” Submenu:
This submenu allows the archives stored in the GT+ memory to be managed.
These may be read, deleted or copied to the WinGTProg program.
The archives read in this way may be either copied to a new WinGTProg installation or to a pre-existing
installation.
“Installation->File” Submenu:
This submenu allows the data from an installation contained in the WinGTProg program to be copied to the
GT+ memory as an archive. This data may then be directly transferred to a receiver memory.
Once the installation has been selected and confirmed, the WinGTProg will prompt the user to choose a
name for the archive to be copied to the GT+ memory. This name must not be more than 8 characters
long.
The GT+ must remain connected during transfer.
If the archive name already exists in the GT+ memory, a warning message will ask whether the user wants
to overwrite the existing archive or cancel the transfer.
“Firmware update” Submenu:
This submenu allows the GT+ embedded program to be updated.
To do so, you must select the new firmware file provided by Prastel and launch the update.
Warning: do not disconnect the GT + during update or you may cause the device to malfunction.
“Memory” Menu
This menu allows direct access to the data stored in the external memory of the receivers connected to the
GT+.
In this mode, the GT+ will behave in the same way as GTPROG and USB93 interfaces. The accessible
functions are identical to the WinGTProg standard operation when the memory is connected to a GTPROG or
USB93 interface.
