EASYBKW
ENGLISH
ISEASYBKW_06_17
.docx
13
6.2
Exiting Programming Mode
1) To exit the Programming Mode at any time: Press the "#" key,
You will hear a beep, the Program LED will be off, the Transmit
LED will turn red. This indicates that the EASYBKW has
returned to Transmit
Mode.
2) Wrong entries may
reset
the
reader
back to Transmit Mode.
3) While in Programming Mode if no key is pressed for 30 seconds
the EASYBKW will exit Programming Mode and return to
Transmit Mode.
6.3
Selecting Keypad Transmission Format
The EASYBKW has three different
keypad transmission formats to
select from. Follow the steps below
to select the appropriate keypad
transmission format that you wish
to use
.
1) Enter Programming Mode
2) Press "1" to enter Menu 1,
the Transmit LED will turn
red.
3) Enter the appropriate option
number for the keypad
transmission format that you
wish to select (see the following table). If an incorrect option
number is entered the reader will return to Transmit Mode and
the keypad transmission format will remain unchanged.
4) System returns to Transmit Mode, you will hear one beep, the
Program LED will turn off the Transmit LED will turn red.
Note:
Only one keypad transmission format can be active at any one
time.
See the table below to determine the Option Number for the Keypad
Transmission Format you wish to select.
GREEN
GREEN
RED
GREEN