EASYBKW
ENGLISH
ISEASYBKW_06_17
.docx
12
6. PROGRAMMING THE EASYBKW
Programming the EASYBKW is done solely via the unit's keypad
driven Programming Menu System (see par. 6.1).
During the EASYBKW's manufacturing process certain codes and
settings are pre-programmed. These settings are the called the
"Default Factory Settings".
The table below shows the names of all the EASYBKW Menus.
Menu Description
Menu
number
Selecting keypad transmission format
1
Changing the programming code
3
Changing the facility code
4
Changing the backlight and LED behavior
6
Return to Factory Default Settings
0
6.1
Entering Programming Mode
1) Press the "#" key 4 times. Transmit LED will turn off and
Program LED will turn red.
2) Enter
your
4-digit
Programming Code.
3) If the Programming Code
is valid the door LED will
turn
green
and
the
EASYBKW will be in
Programming Mode.
Note:
The factory default
Programming Code is 1234. If a
Programming Code is not
entered within 30 sec., the
keypad will return to Transmit Mode.
RED
GREEN
