CATS-HDMI-RX8
1. +5V DC
: Spare power jack for over 60m transmission when the RX may need external
power to work
*
.
2. A/V SIGNAL
: Plug in the CAT5 connected to the respective
A/V SIGNAL
port on the
CATS-HDMI-MX8
3
.
CHANNEL CONTROL
: Plug in the CAT5 connected to the respective
CHANNEL
CONTROL
port on the CATS-HDMI-MX8
4
.
INPUT CHANNEL
: Display the current showing HDMI source channel
5
.
INPUT SELECT
: Push button for switching input source channel in sequential order
6. Signal Level 0-7
: Adjust the 8-level equalization control to the received HDMI signals.
The HDMI signal level varies from 0 (strongest) to 7 (weakest) for
respective transmission length from longest possible range to short
distance. Please adjust the signal level from 7 to 0 and stop turning the
rotary switch whenever the audio/video is playing normally. Inappropriate
signal level setting may cause overpowering issue that would shorten
the product life significantly!
7. HDMI Output
: Connect to HDTV with a HDMI cable
8. IR RECEIVER
: Plug in IR receiver
*
The CATS-HDMI-RX8 has been tested extensively and found that it doesn’t require
external power supply. If in rare situation you find it cannot work with the CATS-HDMI-
MX8, please use any +5V power adapter to plug in the power jack and see if it can work.
If not, please contact your technical support for further service.
~
8
~
