CATS-HDMI-MX8 as master
1.Connect all sources to HDMI Inputs on the 8x8 HDMI over CAT5 matrix master CATS-HDMI-
MX8
2.
Connect each
CHANNEL CONTROL
output port on the CATS-HDMI-MX8 to respective
CHANNEL CONTROL
port on the remote receiver CATS-HDMI-RX8
3.
Connect each
A/V SIGNAL
output port on the CATS-HDMI-MX8 to respective
A/V SIGNAL
input on the remote receiver CATS-HDMI-RX8
4.
Connect IR blaster to the
IR MAIN
jack of CATS-HDMI-MX8 and direct the IR blaster to the
built-in IR receiver of the sources
5.Connect the +5V 6A DC power supply to the CATS-HDMI-MX8
6.Power on all HDMI sources
7.Power on the CATS-HDMI-MX8
CATS-HDMI-RX8 as receiver
1.Connect each HDMI output to HDMI displays
2.
Connect the
A/V SIGNAL
port on the CATS-HDMI-RX8 to the
A/V SIGNAL
port on the CATS-
HDMI-MX8
3.
Connect the
CHANNEL CONTROL
port on the CATS-HDMI-RX8 to the
CHANNEL CONTROL
port on the CATS-HDMI-MX8
4.Connect IR receiver and place the IR receiver at the appropriate position that can receive the
IR command signals sent from the users
5.Dial the 8-level rotary control switch to adjust the HDMI signal level until the picture and sound
are clear
~
13
~
Hardware Installation
