practyl 819880, Руководство по сборке, использованию и обслуживанию

Страница: 75 / 86

149 148
exceeded.
• Routing must always be carried out against the direction of rotation (bitrotation)
of the bit.
• The bit must be running at full speed before lowering into the work-piece.
• When operating the machine, take great care and always hold the router handles
firmly with both hands. Always provide for a secure footing when working.
• Beware of the reaction torque of the machine, particularly if the bit becomes
jammed in the workpiece.
• On completion of work, allow the machine to slide back to its initial position by
releasing the handle.
• Make yourself familiar with your working area and be alert for possible hazards,
which you might not hear due to machine noise.
• Caution: Allow for run down time of bit after turning router off. Wait for the
machine to come to a complete stop before removing from the work piece.
• Never slow the router down with your hands.
• Do not touch the bit immediately after operation; it may be extremely hot and
could burn you.
• Never stop the router by applying lateral pressure to the bit.
• Do not force the router. Your router will do a better job if you take it slowly.
• Avoid cutting nails and screws. Inspect timber and remove all nails and screws
before cutting.
• In the event of an electrical or mechanical malfunction, immediately switch off the
saw and disconnect the power lead from the mains supply.
3. DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13 Housing
Depth adjust knob(quick)
On/Off switch
Air inlet
Spindle lock button
Right handle
Wing bolts
Depth indicator
Depth scale
Depth ruler
Plunge locking lever
Depth adjust knob
Variable speed dial 14
15
16
17
18
19
20
21
22
23 Safety button
Base
Dust extraction adapter
Parallel guide
Template guide
Long guide rods
Spanner
Centering position needle
Depth stop turret
Collet lock nut
4. TECHNICAL DATA
5. ASSEMLY INSTRUCTIONS
Voltage
Warning
:
Isolate the machine from the power supply before any
adjustments, maintenance or when changing router bits.
Frequency
Power input
No load speed
Collet
Plunge depth
L
PA
(sound pressure)(K=3dB(A))
L
WA
(sound power) (K=3dB(A))
Vibration value (K=1.5 m/s2)
230-240V-
50Hz
1200W
11500-30000/min
Φ8mm
52mm
86dB(A)
97dB(A)
6.23m/s2
EN EN