PR Lighting PR-111ER MOON, Руководство пользователя

Страница: 4 / 14

Moon manual.doc 4/14
Mount the bracket provided on the body of the projector using the 2 M6 knobs provided, and then
suspend the projector via a fixing hole on the bracket using an M12 size bolt and a nut. When you
want to adjust the angle of the body of the projector, you only loosen the 2 M6 knobs carefully and
then adjust the angle of the body. Always ensure that the projector is firmly positioned to avoid
vibration and slipping, and always ensure that the structure to which you are attaching the projector is
secure and is able to support a weight of 10Kg for each MOON.
For safety the unit should have a secondary fixing with the safety cord provided through the hole on
the upper unit.
Open the lamp access hatch at the bottom of the projector by loosening the 2 M4 screws as shown
above.
Take out the lamp-bracket from the inside of the projector by loosening the 2 M4 screws.
Insert the lamp in the lamp holder.
Install the lamp-bracket on the position slot well and then tighten the 2 M4 screws.
Close the lamp access hatch again, and then tighten the 2 M4 screws.
NOTE:
The MSD series are high pressure lamps with external igniters . Care should always be
taken when handling these lamps. Always read the manufacturers "Instructions for use" enclosed
with the lamp.
FITTING THE LAMP
INSTALLING THE PROJECTOR