PR Lighting PR-111ER MOON, Руководство пользователя

Страница: 6 / 14

Moon manual.doc 6/14
SETUP OPTIONS
CODE CHOICE FUNCTION
Y Pan inversion enable-Pan is inverted
1
N Pan inversion disable-Pan is normal
Y Tilt inversion enable-Tilt is inverted
2
N Tilt inversion disable-Tilt is normal
Y Sound activation enable
3
N Sound activation disable
Y Automatic programmes enable
4
N Automatic programmes disable
5 Reserved for possible future development
6 Reserved for possible future development
Y Reset enable
7
N Reset disable
8 When enable, colours are linear change
9 Reserved for possible future development
A Reserved for possible future development
B Reserved for possible future development
Without connecting the controller, with the setup option 3 (sound activation) or 4 (auto programmes)
enable, the projector will run in Stand-Alone mode.
If you enable a combination of setup options 3 (sound activation) and 4 (auto programmes), the
projector will run in auto programmes.
You may set the DMX start address randomly in Stand-Alone mode.
When the projector is activatived by sound, the red indicator will flash according to the rhythm of the
music. And when the projector is running in auto programmes, the indicator will be constantly red.
XLR CONNECTORS
Connection between controller and projector and between one projector and another must be made
with 2 core screened cable, with each core having at least a 0.5mm diameter. Connection to and
from the projector is via cannon 3 pin XLR plugs and sockets which are included with the projector.
The XLR's are connected as shown in the table above.
Note: Care should be taken to ensure that none of the connections touch the body of the plug or each
other. The body of the plug is not connected in any way. The MOON accepts digital control signals in
standard DMX512 (1990) format.
STAND-ALONE MODE
XLR CONNECTORS AND TERMINATOR