PR Lighting PR-111ER MOON, Руководство пользователя

Страница: 10 / 14

Moon manual.doc 10/14
Carefully lift off the upper plastic body which has the name label sticker on it by loosening the 6
screws.
Using a small screwdriver remove the gobo retaining spring.
Insert the gobo into position, and then insert the retaining spring.
Install the upper cover and tighten the 6 screws.
To ensure the continued smooth rotation of the rotating gobos it is recommended that the bearings
for rotation-gobo-gears are lubricated periodically, preferably every three months. Use only high
working temperature low viscosity oil, a syringe with a fine needle is the easiest way to introduce the
oil to the bearings around each gobo. Do not over lubricate as this will cause spillage when the gears
rotate.
To ensure the reliability of the projector it should be kept clean. It is recommended that the fans
should be cleaned every 15 days. The lens and dichroic colour filters should also be regularly
cleaned to maintain an optimum light output.
Do NOT use any type of solvent on dichroic
colour filters.
Cleaning frequency depends on the environment in which the fixture operates: damp, smoke or
particularly dirty surroundings can cause greater accumulation of dirt on the unit’
s optics. A soft cloth
and typical glass cleaning products should be used in cleaning. It is recommended to clean the
external optics at least once every 20 days and clean the internal optics at least once every 30/60
days.
Do not use any organic solvent, e.g. alcohol, to clean the housing of the projector.
KEEPING THE PROJECTOR CLEAN
CHANGING THE GOBOS
LUBRICATION