CONTROL AND MONITORING GUIDE
The controller interface is comprised of four main menus.
Below are example screens:
Overview
Viewing & Adjusting System Automation Settings
MAIN
TREND LOG
FAULT LOG
MENU
Controls
• Emergency Stop
• Access to Pump System
Settings
Monitoring
• System Status (Normal,
faulted, standby)
• Discharge Pressure
• Flow Rate
(Requires flow meter)
• Water Level (Requires level
transmitter)
• Pump Status
• Motor Frequency &
Amperage
USING THE INTERFACE
View System
Operational Data:
• Discharge Pressure
• Flow
• Pump Frequency
• Level (Requires
Level transmitter)
View and Diagnose
System Faults
System Settings
• Pressure
• Flow
• Level
Pump Settings
• Sleep Settings
• Lag Pump Settings
• Lead-Lag Alternation
• VFD Bypass Mode
• Pony Flow Settings
Miscellaneous
• Line Fill Mode
• Remote Start
• CW Valve
• Panel Temp
Settings
CAUTION! Improper controller settings can cause equipment damage. Settings should only be adjusted by qualified personnel.
Call Precision Pumping Systems for assistance: 208-323-5300.
Gray boxes display data. They
cannot be used to change settings.
Press buttons to open
corresponding settings screen.
Press in white boxes to input values.
A keypad will appear:
ENT = ENTER
CLR = CLEAR
CAN = CANCEL (Returns to previous screen)
Enter the new settings into the appropriate input fields.
NOTE: The new settings will be implemented immediately.
Controller Settings
• Load/Save Settings
• E-mail Settings
