HRS-HB-9
S
UPPORT
M
ODULE
H
ANDBOOK
.
DOCX
11
Standard rear interface
Standard rear interface
Blindmate rear interface
Standard rear interfac
Gigabit Ethernet
Serial Digital
Single Amplifier
Splitter or switch
Controlling amplifier module
2.3
ViaLiteHD
RF links are factory preset and ready to operate. However they can be software controlled or manually controlled via the DIP
switches fitted to each module.
Manual control
2.3.1
The Plug-in amplifier modules can be manually configured to set various operational parameters. The dual in line package (DIP) switch SW2
control these configurations, and is located on the bottom side of the PCB and can be accessed by withdrawing the module by approximately
a third of its length
Manual control, DIP switch functions
2.3.2
Located on the bottom side of the module board, DIP switch SW2) provides manual control of various functions. SW2 is dedicated to manual
gain control (MGC). Once MGC_ON is switched on, internal RF attenuators can be set directly to a desired level.
All modules will be delivered with DIP switches all set to OFF (clear). Only special manual gain control modules will be delivered with the
DIP switches set to the modules factory calibrated gain settings.
RF port A
RF port A
RF port B
RF port B
RF port C
