20
B
A
Relay/SSR Module
Table 9.1
Relay
SSR
1
2
3
1
2
3
1
2
3
1
2
3
Output Type
Jumper Setting - A
Jumper Setting - B
MOUNTING / UN-MOUNTING OF MODULES
The Figures 9.5 & 9.6 illustrates how to mount the plug-in Output-2 & Output-3 module, respectively. Notice the orientation of
the indicator and a few identifying components shown in figures to help locate the plugs for the modules. Ensure that the
socket snap-fits into the plug and the 2 projected parts on the module fit into the 2 slots provided on the Power-Supply / CPU
PCB for proper electrical contacts and secured fitting.
For plugging out the module(s), follow the steps below:
1.
Gently pull apart the Power-supply board and the CPU board until the projections of the module board come out of the
slots.
2.
Pull the module outward to unlock the socket from the plug.
User Manual
neuro 100
Figure 9.4
