Xcelerators Owner’s Manual
18
Locate the OBD II diagnostic port on your vehicle.
(See page 6 for reference pictures)
GET DIAGNOSTIC TROUBLE CODES
STEP 1
STEP 2
Tune Engine
Current Tuning
Data Scanning
Diag. Options
•
View and clear vehicle’s Diagnostic Trouble Codes from vehicle’s OBD II port
Selection arrow will be be on “Tune Engine” option.
Press on the keypad to go down to “Diag.
Options”(Diagnostic Options) press .
Selection arrow will be on “Get DTC’s” option. Press on the keypad to get
your vehicles Diagnostic Trouble Codes.
If there is no DTC codes, you will see the following screen press
to go back.
Getting a code and you dont know what it means? DTC codes can be
referenced online at
www.PPEDIESEL.com/dtc
(Note: Pressing will clear DTC’s and take you back to “Diag.
Options” menu)
STEP 3
Get DTC’s
Reset Auto Tran
Back to Stock
Other Options
No DTC Codes Set
Press any Button
to Continue. . .
Connect the Xcelerator into vehicles diagnostic port. When prompted turn the
ignition key to the RUN position
(DO NOT start engine)
; the Xcelerator will load
through a seris screens and stop. The main menu will load as shown:
