Xcelerators Owner’s Manual
Locate the OBD II diagnostic port on your vehicle.
(See page 6 for reference pictures)
CURRENT VEHICLE TUNING
STEP 1
STEP 2
Tune Engine
Current Tuning
Data Scanning
Diag. Options
•
Current tuning option will show the current tune installed into your vehicle.
Selection arrow will be on “Tune Engine” option.
Press on the keypad to go down to “Current Tuning” press .
STEP 3
Screen will load showing your vehicles current tune, calibrations,
and custom changes.
16
Press on the keypad to go back to main menu.
Connect the Xcelerator into vehicles diagnostic port. When prompted turn the
ignition key to the RUN position
(DO NOT start engine)
; the Xcelerator will load
through a seris screens and stop. The main menu will load as shown:
