Xcelerators Owner’s Manual
12
The Xcelerator will display the following screen to confirm your installation.
You can press or to select “Install Tune” or “Return to Stock”.
STEP 8 (continued)
Install Tune
Return to Stock
/ Y to Select
Install Performance tune by pressing on the “Install Tune” option.
N
ote: Select “Return to Stock” option if you do not wish to continue with
installation and factory settings will be restored.
The Xcelerator will now run through a series of screens.
Any interference during the programming process (ie. opening or closing
of your vehicle’s doors) may cause a communication error with your
vehicle’s PCM and will result in your vehicle not starting!
(approx 5-10 mins.)
Final installation screen will show the following message:
Re-install fuses, installation complete.
STEP 9
Power Increased
Turn Key Off and
Remove the Tuner
From Your Truck
Installing Your
Selected Tuning
Accessing
Stock Data
Installing Your
Selected Tuning
Making Changes
to Stock Data
Unlocking PCM,
Do Not Disturb
or Start the
Engine.
Installing Your
Selected Tuning
DO NOT Disturb00
Please Wait for
15 Seconds
