Powis Parker Fastback P31, Руководство пользователя

Страница: 59 / 61

P O W I S P R I N T E R
Ô
M O D E L 3 1 U S E R ’ S M A N U A L
57
C. Advanced
Initial Zoom Setting
This feature controls the size of the book image in the Design
Window. You can input the percent of zoom you would like,
from 0.5% to 1.00%. The factory setting is 0.93%.
Pages Per Inch
The printer measures book thickness by inches or millimeters. To
translate number of sheets, the printer must have a conversion
rate. Depending on the thickness of your paper, this conversion
rate can vary. For example, there will be fewer sheets of thick
paper than thin paper in an inch.
The factory setting—250 pages per inch—is based on standard,
20-pound bond paper. If you are using different paper, and also
using the “Sheets” feature to measure your book’s thickness, you
may want to change this default. If you don’t, the printer will
calibrate the appropriate width strip for 20-pound bond paper, and
you will end up with strips that do not fit your documents.
Keep in mind that if you are using the “Thickness” feature to
measure your books, or if you press the “Ask” button to update
your design’s thickness, you do not need to worry about changing
this setting.
D. Serial Port
COM Port Number
Choose between 1 and 4, depending on which port you connect
the PowisPrinter™-PC connector cable to. The default setting is 1.
(See Chapter 1, “Installing the Software,” page 37, for more
information on choosing ports.)
E. Regional Settings
Here you can set the default units, language, and orientation you
would like PowisPrint™ to use (see Figure 4 on next page).
Before changing any of these regional settings, you must close all
open Design Windows.
Language
Select the language by clicking the corresponding radial button.
Note that if you change the language from English, the
measurement units and orientation automatically switch to the
European settings. For example, if you select “French” as your
language, PowisPrint™ switches to millimeters and the European
text orientation. If, however, you would like to work with a
European language but still use inches or the US text orientation,
simply click the appropriate button.
P R E F E R E N C E S