Powis Parker Fastback P31, Руководство пользователя

Страница: 23 / 61

P O W I S P R I N T E R
Ô
M O D E L 3 1 U S E R ’ S M A N U A L
D I A G R A M A / S C H É M A / F I G U R E 18
D I A G R A M A / S C H É M A / F I G U R E 17
D I A G R A M A / S C H É M A / F I G U R E 16
D I A G R A M A / S C H É M A / F I G U R E 15
T H E P O W I S P R I N T E R
™
A N D A
F A S T B A C K
®
B I N D E R — A D Y N A M I C D U O
VII
You can set up the PowisPrinter ™ next to a Fastback ® binder, so
that after your strip prints, it goes directly to the binder for binding.
Which means you can print and bind in one easy step! Once you
have the two machines docked, you don’t have to worry about re-
feeding the strip into the binder to bind a document. And you can
save time binding multiple books with the same title, because the
printer can print a strip while the previous book (with the same
width and title) is being bound. Fancy, huh?
A. Fastback
®
Binder Docking Kit
If you plan to dock your Fastback
® Model 11 or Model 15 to the
PowisPrinter ™ , please contact your authorized Fastback ®
representative. They’ll know the details regarding the service
modification to your Fastback
® binder that allows the Fastback ®
binder to talk to the PowisPrinter ™ .
B. Docking the PowisPrinter
™
to a Fastback
®
Binder
1. Make sure that your Fastback
® binder has been modified to talk to
the PowisPrinter ™ .
2. Place the PowisPrinter ™ ’s alignment tab close to the Fastback ®
Binder’s Binder Strip Guide.
• For a Model 11, align the printer to the binder so that the
binder’s strip guide end is nestled in the inside corner of the top
alignment tab (Figure 15).
• For a Model 15, use the bottom alignment tab (Figure 16).
3. Position the two machines so that there is access to the
PowisPrinter ™ ’s front door.
4. • If you have a Model 15, place the 6" long purple cylinder onto
the keyboard’s foot (Figure 17) and place the keyboard in front of
the Fastback
® binder.
• For the Model 11, place the keyboard on top of the front
panel of your Fastback binder (Figure 18).
5. Run the keyboard cable directly to the back of the binder, then
over to the printer’s bottom Input Port.
21
P O W I S P R I N T E R
™
+ A F A S T B A C K
®