ENGLISH
III.
Connecting the EBM in a rack form
1.
Using the same method as assembling
UPS in a rack form, assemble EBM into
the rack-mounting on the top or
bottom of the UPS.
2.
Connect the earth line from UPS (port
A ) to EBM (port B )
3.
Take off the LCD box, and unscrew the
internal screws.
4.
Take off the front panel, and connect
the battery terminal (A) from UPS to
EBM terminal (B) shown as below.
Users need to remove the small gate(C)
on side of the front panel to allow the
outlet wire of the EBM to pass through
the gate and then reassemble front
panel.
5.
After installing the UPS into rack, the load can then be connected to UPS. Please
A
B
Unscrew
Unscrew
B
A
C
