ENGLISH
II.
Connecting the EBM in Tower form:
1.
Slide down the UPS and EBM vertically and place two UPS stands with the extend
part at the end of the tower.
2.
Tighten the screw on the metal
sheet for stabilization
3.
Connect the Earth line from UPS
(port A ) to EBM (port B)
4.
Take off the front panel, and connect the battery terminal (A) from UPS to EBM
terminal (B) shown as below. Users need to remove the small gate(C) on side of
the front panel to allow the outlet wire of the EBM to pass through the gate and
then reassemble front panel.
B
A
B
A
C
