INDEX
1.1 Warnings
1.2 Installation
1.2.1 Standard Installation
1.2.2 Dimension Chart
1.2.3 Components of Installation
1.2.4 Installation of Articulated Arm Opener
1.2.5 Emergency Release
1.2.6 Photocell Installation
1.2.7 Green Box Installation
1.2.8 Power Supply Connections
2.1 Wiring Connection
2.1.1 Master Motor is installed at right side
2.1.2 Master Motor is installed at left side
2.2 LED Indication
2.3 Transmitter Memorizing and Erasing Process
2.4 System Learning Process
2.5 Gate Operation
2.6 Gate-moving Logic
2.7 Checking the Gate Movement
3. Function Setting
3.1 Function of the Led Display
3.2 Photocell Adjustment
3.3 Operations for Function Settings
3.4 Function Settings
4. Trouble Shooting
5. Technical Features
5.1 Dimension
5.2 Technical Feature
6. Maintenance
1
1
1
2
2
4
4
6
6
7
8
9
10
10
10
12
12
12
12
12
13
14
15
17
17
17
18
18
1.1 Warnings
Please read this instruction manual carefully before the installation of
gate-automated system.
This manual is exclusively for qualified installation personnel.
Manufacturer is not responsible for improper installation and failure to
comply with local electrical and building regulations.
Keep all the components of system and this manual for further
consultation.
In this manual, please pay extra attention to the contents marked by the
symbol:
Be aware of the hazards that may exist in the procedures of installation
and operation of the gate-automated system. Besides, the installation
must be carried out in conformity with local standards and regulations.
If the system is correctly installed and used following all the standards
and regulations, it will ensure a high degree of safety.
Make sure that the gates works properly before installing the
gate-automated system and confirm the gates are appropriate for the
application.
Do not let children operate or play with the gate-automated system.
Do not cross the path of the gate-automated system when operating.
Please keep all the control devices and any other pulse generator away
from children to avoid the gate-automated system being activated
accidentally.
Do not make any modifications to any components except that it is
mentioned in this manual.
Do not try to manually open or close the gates before you release the
gear motor.
If there is a failure that cannot be solved and is not mentioned in this
manual, please contact qualified installation personnel.
Do not use the gate-automated system before all the procedures and
instructions have been carried out and thoroughly read.
Test the gate-automated system weekly and have qualified installation
personnel to check and maintain the system at least every 6-month.
Install warning signs (if necessary) on the both sides of the gate to warn
the people in the area of potential hazards.
