manualshive.com logo in svg

PowerTec PT2200i, Инструкция по эксплуатации

Поделиться
Скачать
PowerTec PT2200i Скачать руководство пользователя страница 9

8.

9.

www.powertec.net.nz

www.powertec.net.nz

PT2000i

  DIGITAL INVERTER GENERATOR

Be aware that when engine parts are moving 

fast they cannot be seen clearly.

•  Keep access doors on enclosures closed 

and locked when access is not required.

•  When working on or around the generator 

always wear protective clothing including 

AS/NZS approved safety gloves, safety 

eye goggles, and safety hat.

•  Do not alter or adjust any part of the gen-

erator that is assembled and supplied by 

the manufacturer.

•  Always follow and complete scheduled en-

gine and generator maintenance.

Chemicals

•  Avoid contact with hot fuel, oil, exhaust 

fumes, and hot solid surfaces.

•  Avoid body contact with fuels, oils and 

lubricants used in the generator. If swal-

lowed, seek medical treatment immedi-

ately. Do not induce vomiting if fuel is swal-

lowed. For skin contact, immediately wash 

with soap and water. For eye contact, im-

mediately flush eyes with clean water and 

seek medical attention.

Noise

Prolonged exposure to noise levels above 

85dBA is hazardous to hearing. Always wear 

AS/NZS approved ear protection when oper-

ating or working around the Generator when 

it is running.

Extension Cords

If an extension cord (not included) is used, 

make sure to use only AS/NZS approved 

cords having the correct gauge and length 

according to the following table:

Содержание PT2200i

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды