manualshive.com logo in svg

PowerTec PT2200i, Инструкция по эксплуатации

Поделиться
Скачать
PowerTec PT2200i Скачать руководство пользователя страница 24

24.

25.

www.powertec.net.nz

www.powertec.net.nz

PT2000i

  DIGITAL INVERTER GENERATOR

Air Filter Maintenance

Air filter maintenance should be performed every 6 

months or 100 hours. The air filter may need to be 

cleaned more frequently when using in unusually wet or 

dusty areas.

1.  (A) Remove the screws (1) and then remove

  the cover (2).

2. (B) Remove the screws (1) and then remove the air 

filter case cover (2).

3. (C) Remove the foam element (1).

4. Wash the foam element in solvent and dry it.

5. Oil the foam element and squeeze out excess oil. The 

foam element should be wet but not dripping.

CAUTION!

 Do not wring out the foam element when squeez-

ing it. This could cause it to tear.

6. Insert the foam element into the air filter case. Be 

sure the foam element sealing surface matches the 

air filter so there is no air leak.

CAUTION!

 The engine should never run without the foam 

element.

7. Install air filter case cover, cover, and screws.

B.

C.

A.

2

1

Содержание PT2200i

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды