manualshive.com logo in svg

PowerTec PT2200i, Инструкция по эксплуатации

Поделиться
Скачать
PowerTec PT2200i Скачать руководство пользователя страница 15

14.

15.

www.powertec.net.nz

www.powertec.net.nz

PT2000i

  DIGITAL INVERTER GENERATOR

(B) Remove the oil filler cap (1).

(C) Using the funnel fill with 0.4L of 

      SAE 10W-30 oil. 

(D) Fill to required oil level.

Replace oil filler cap and secure side panel 

with screws.

Adding Fuel

The fuel tank holds 5 litres.

DO NOT overfill the tank, otherwise it may 

overflow when the fuel warms up and 

expands.

NOTE: For safety reasons, once fuel has 

been added to this unit it cannot be returned 

to the place of purchase.

1.  Use clean, fresh, regular unleaded fuel 

with a minimum octane rating of 91.

2.  DO NOT mix oil with fuel.
3.  Clean area around the fuel cap.
4.  Remove the fuel cap.
5.  Be sure that the fuel strainer is in place.
6.  Slowly add fuel to the tank up to the red 

line. (E) DO NOT overfill. 

7.  DO NOT fill above fuel strainer.
8.  Screw on the fuel cap and wipe away any 

spilled fuel.

NOTE: Check fuel and oil level each time 

before use.

B.

C.

D.

E.

In order to add motor oil you will need to re-

move the side panel from the unit.(A) Using 

Phillips-head screwdriver remove screws to 

remove the side panel.

Содержание PT2200i

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды