PowerTec DC1080, Руководство пользователя

Страница: 10 / 16

GENERAL MAINTENANCE
WARNING
Make sure the machine is turned off and the cord is
disconnected from the power source before servicing and
removing/replacing any components on the machine.
• Check the dust collector daily for loose mounting bolts,
screws, damaged wires, worn switch, full collection bag
and any other unsafe condition.
CLEANING
WARNING
ALWAYS wear a respirator and safety goggles when
emptying the collector bags.
Check and empty the collection bag on your dust collector
regularly. The machine operates at a much higher level of
efficiency when the collection bag is empty.
MAINTENANCE 8
MAINTENANCE
8
LUBRICATION
The sealed bearings in the motor have been
permanently lubricated at the factory. They require no
further lubrication.
MACHINE STORAGE
• When the dust collector is not in use, disconnect the
cord from the power source and store the machine in a
dry place.
• Do not expose the machine to rain.
• Ensure the cord is kept away from potential damage
sources such as; sharp objects, chemicals, heat
sources and water.
TOOL REPAIRS
• If power cord is worn, cut, or damaged in any way, have
it replaced immediately.
• Replace worn abrasives when needed.
• Replace any damaged or missing parts. Use parts list
to order parts. Any attempt to repair motor may create
a hazard unless repair is done by a qualified service
technician. Call the customer service line at
847-780-6120
for assistance.