PowerSmith PLM325, Руководство оператора

Страница: 6 / 20

6
English
CODE CAUSE CORRECTIVE MEASUREMENT
204 MEASURING
RESULTS NOT
PLAUSIBLE
ReTAKe MeAsUReMeNTs AccoRD -
ING TO SPECIFICATIONS
208 EXCESS CURRENT RETURN TOOL TO MANUFACTURER
220 LOW BATTERY INSTALL 2 NEW BATTERIES
252 HIGH TEMPERA-
TURE
LET TOOL COOL TO BELOW 104°
253 LOW TEMPERA-
TURE
WARM TOOL TO ABOVE 32°
255 weAK sIgNAl
MEASURING TIME
TOO LONG
USE A TARGET PLATE ON A MORE
REFLECTIVE SURFACE
256 RECEPTION
SIGNAL TOO
STRONG
REDUCE TARGET REFLECTIVENESS
OR DECREASE AMBIENT LIGHT
261 OUT OF RANGE MEASURE TARGET WITHIN RANGE
500 HARDWARE
ERROR
REMOVE AND REINSTALL BATTERIES
MAINTENANCE
WARNING:
Do not turn the laser on while
cleaning the lens. Serious injury to eyes could result.
• Keep the laser lens clean. A dirty lens will affect the
laser beam operation. Clean the lens with a moist
cotton swab. Clothes with nylon content could scratch
the lens causing the laser to operate incorrectly.
• clean the tool housing with a moist cotton cloth.
Use only water. Do Not use cleaners, solvents or
compressed air to clean the tool.
• Never immerse or let liquid get inside the tool.
• Dry the tool with a cotton lint fee cloth and allow to dry
completely before using or storing the tool.
This product is warranted free from defects in material and
workmanship for 2 (Two) years after date of purchase. This
limited warranty does not cover normal wear and tear or
damage from neglect or accident. The original purchaser
is covered by this warranty and it is not transferable. Prior
to returning your product to store location of purchase,
please call the Toll-Free Help Line for possible solutions.
ACCESSORIES INCLUDED IN THIS KIT ARE NOT
COVERED BY THE 2 YEAR WARRANTY.
HELP LINE
For questions about this or any other
PowerSmith
™
product,
Please call Toll-Free:
888-552-8665.
Or visit our website:
www.
powersmithproducts.com
TROUBLE SHOOTING wARRANTy