PowerSmith PLM14021H, Руководство оператора

Страница: 9 / 60

FIG 2
LOCKED POSITION
UNLOCKED POSITION
3 POSITIONS
LOWER HANDLE
LOWER HANDLE
KNOB
UPPER
HANDLE
9
English
ASSEMBLY AND ADJUSTMENTS
Warning:
if any parts are damaged or missing, do not operate this product until
the parts are replaced. Using a product with damaged or missing parts could result in serious
personal injury.
Warning:
Do not attempt to modify this product or create accessories not
recommended for use with this product. any such alteration or modification is misuse and
could result in a hazardous condition leading to possible serious personal injury.
Warning:
Do not insert safety key or battery pack until assembly is complete and
you are ready to mow. Failure to comply could result in accidental starting and possible serious
personal injury.
Warning:
never operate the mower without the proper safety devices in place and
working. never operate the mower with damaged safety devices. Operating the mower with
missing or damaged parts can result in serious personal injury.
Warning:
To prevent accidental starting that could cause serious personal injury,
always remove the battery pack from the product when assembling parts.
UNFOLDING AND ADJUSTING HANDLE ASSEMBLY
To Raise the Handle Assembly (FIG 2)
•
Pull and rotate the lower handle knobs 90° on both sides to loosen the lower handles.
•
Pull up the lower handles to the operating position. You may raise or lower the handle to a position comfortable for
you. There are 3 positions for you to choose.
•
Secure the lower handles by rotating the lower handle knobs 90° back to locking position.
NOTE:
ensure both sides are set at the same position for proper assembly.
•
Pull up the upper handle and raise it into its operating position. Make sure the lower handles are seated in the grooves
at the bottom of the upper handle.
•
Secure the upper handle by tightening the upper handle knobs (rotating clockwise).
NOTE:
Do not allow the starter cable to become pinched or trapped when raising the handle.