PowerSmith PLM14021H, Руководство оператора

Страница: 12 / 60

12
English
THE SAFETY KEY (FIG 8)
The safety key must be inserted to the key slot before the mower can be started. See fIG 8.
Remove the key and store it on the key holder when mower is not in use or performing any adjustments or repairs on
the mower.
Warning:
always inspect mower for missing or damaged parts and blade for
damage, uneven, or excessive wear prior to use. Use of the mower with damaged or missing
parts can result in serious personal injury.
Warning:
Do not allow familiarity with products to make you careless. remember
that a careless fraction of a second is sufficient to inflict serious injury.
Warning:
The operation of any lawn mower can result in foreign objects being
thrown into your or others’ eyes, which can damage eyes severely. always wear safety glasses
while operating the mower or while performing any adjustments or repairs on the mower.
Warning:
Ensure that other people and pets remain at least 100’ (30m) away from
the mower when it is in use.
STARTING/STOPPING THE MOWER (FIG 1)
To Start the Mower
•
Install both battery packs and insert the safety key into key slot.
•
Press and hold the start button.
•
Pull the bail switch toward the handle and release the start button to start the mower.
NOTE:
The mower only works when both charged PowerSmith™ Plb14025 battery packs are installed.
To Stop the Mower,
fully release the bail switch.
Warning:
The blade will continue to rotate for a few seconds after the mower is
turned off. allow the motor/blade to stop rotating before starting it again. Do not rapidly turn
the mower off and on.
LED HEADLIGHTS
Two leD headlights (19-fIG1) are located on the front of motor head. The headlights turn on automatically when the
mower starts.
MOWING TIPS
•
Make sure the lawn is clear of stones, sticks, wires, and other objects that could damage the lawn mower blades or
motor. Do not mow over property stakes or other metal posts. Such objects could damage the blade or be accidentally
thrown by the mower in any direction and cause serious personal injury to the operator and others.
•
a sharp blade will greatly enhance the performance of the mower, especially when cutting tall grass. Make sure to
check the sharpness of the blade before mowing.
•
for best results, do not mow in circles. Travel back and forth across the lawn.
•
When cutting thick grass, reduce your walking speed in order to allow for a more effective cut and a proper discharge
of the clippings.
•
for a healthy lawn, always cut off one-third or less of the total length of the grass.
•
Clean the underside of the mower deck after each use to remove grass clippings, leaves, dirt, and any other
accumulated debris.
OPERATION
ASSEMBLY AND ADJUSTMENTS