Powersmart PS8213, Инструкция по эксплуатации, Страница: 8 / 18

8
 Keep the tool and its handle dry, clean and free from oil and grease. Always use a clean cloth when
cleaning. Never use brake fluids, gasoline, petroleum-based products, or any strong solvents to clean
your tool.
 Do not operate the tool if it does not contain a legible warning label.
 Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into
account the working conditions and the work to be performed. Use of the power tool for operations
different from those intended could result in a hazardous situation.
 Save these instructions. Refer to them frequently and use them to instruct others who may use this
tool. If you lend this tool to someone else, also lend them these instructions.
SERVICE
 Tool service must be performed only by qualified repair personnel. Service or maintenance
performed by unqualified personnel could result in a risk of injury.

When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance
section of this manual. Use of unauthorized parts or failure to follow Maintenance Instructions may
create a risk of electric shock or injury.
SPECIFIC SAFETY RULES FOR ELECTRIC STRING TRIMMER

Only operate trimmer in daylight or good artificial light.

When being used as an Edger, stones, pieces of metal and other objects can be thrown out at high
speed by the line. The tool and guard are designed to reduce the danger. However, the following
special precautions should be taken: MAKE SURE that other persons and pets are at least 100 feet
(30m) away.

Use only the manufacturer’s 0.065 in. diameter replacement line in the cutting head. Do not use any
other cutting attachment, for example, metal wire, rope, or the like. To install any other brand of
cutting head to this string trimmer can result in serious personal injury.

Never operate unit without the grass deflector in place and in good condition.

Check damaged parts. Before further use of the tool, a guard or other part that is damaged should be
carefully checked to determine that it will operate properly and perform its intended function. Check
for alignment of moving parts, binding of moving parts, breakage of parts, mounting and any other
conditions that may affect its operation. A guard or other part that is damaged must be properly
repaired or replaced by an authorized service center to avoid risk of personal injury.

Never use blades, flailing devices, wire, or rope. Unit is designed for string trimmer use only. Use of
any other accessories or attachments will increase the risk of injury.

Keep the air vents clean and free of debris to avoid overheating the motor. Clean after each use.

Stop the unit and disconnect the power source when not in use. Carry the unit with the motor
stopped.

Do not use the string trimmer with any type of accessory or attachment. Such usage might be
hazardous.

Risk of cut. Keep hands away from the line. Keep both hands on handles when power is on.

Do not attempt to remove cut material or hold material to be cut when lines are moving. Make sure
trimmer switch is off when clearing jammed material from guard. Do not grasp the guard or lines
when picking up or holding the trimmer.

Do not force trimmer. It will do the job better and with less likelihood of a risk of injury at the rate for
which it was designed.

When not in use, the string trimmer should be stored indoors in a dry and high or locked-up place, out
of reach of children.