Powersmart PS8213, Инструкция по эксплуатации, Страница: 7 / 18

7

Do not operate the equipment while barefoot or when wearing sandals or similar lightweight
footwear. Wear protective footwear that will protect your feet and improve your footing on slippery
surfaces.

Keep all parts of your body away from any moving part.

Do not overreach. Keep firm footing and balance. Overreaching can result in loss of balance.

Avoid Accidental Start. Do not carry plugged in appliance with finger on trigger. Be sure the switch
trigger is not engaged before plugging in.

Do not use tool if switch trigger does not turn it on or off. Any tool that cannot be controlled with the
switch trigger is dangerous and must be repaired.

Disconnect appliance. Remove trimmer from power source before storing, servicing, changing
accessories such as cutting line and when not in use. Such preventive safety measures reduce the risk
of starting the tool accidentally.

Do not abuse the cord . Never carry the string trimmer by the cord or yank the cord to disconnect it
from the receptacle. Keep the cord away from heat, oil, and sharp edges.

Ground Fault Circuit Interrupter(GFCI) protection should be provided on the circuit(s) or outlet(s) to
be used for the string trimmer. Receptacles are available having built-in GFCI protection and may be
used.

Do not wear loose clothing or jewelry. They can get caught in moving parts. Protective rubber gloves
and non-slip footwear are recommended when working outdoors.

Use safety glasses . Also use safety footwear, snug-fitting clothing, protective gloves, hearing and
head protection.

WARNING:
Some dust created by this product contains chemicals known to the State of
California to cause cancer, birth defects or other reproductive harm. Some examples of these
chemicals are:
-compounds in fertilizers
-compounds in insecticides, herbicides and pesticides
-arsenic and chromium from chemically treated lumber
Your risk from exposure to these chemicals varies depending on how often you do this type of work. To
reduce your exposure to these chemicals, wear approved safety equipment such as dust masks that are
specially designed to filter out microscopic particles.
POWER TOOL USE AND CARE
 Know this tool. Read manual carefully, learn its applications and limitations, as well as the specific
potential hazards related to this tool.
 Check for misalignment or binding of moving parts, breakage of parts, and any other condition that
may affect the power tools operation. If damaged, have the power tool serviced before using. Many
accidents are caused by poorly maintained tools.
 Do not force power tool. Use the correct power tool for your application. The correct power tool will
do the job better and safer at the rate for which it is designed.
 Maintain tools with care. Keep tool clean. A properly maintained tool, reduces the risk of binding
and is easier to control.
 Store idle power tools out of reach of children and other untrained persons. Power tools are
dangerous in the hands of untrained users.
 Check operation of the tool before use. Do not use the tool if the workpiece contact mechanism is not
working correctly as accidental driving of a fastener may occur.
 Do not use the power tool if switch does not turn it on or off. Any power tool that cannot be
controlled with the switch is dangerous and must be repaired.