Powersmart PS8213, Инструкция по эксплуатации, Страница: 12 / 18

12
OPERATING INSTRUCTION
STARTING/STOPPING THE TRIMMER
Before you start the unit, make sure the trimmer is not contacting any object.

Attach the outlet end of an extension cord to the plug on the rear of the string trimmer.
NOTE: Use only approved outdoor extension cords.

Route the extension cord through the slot located on the rear of the string trimmer housing and place
underneath the cord retainer.

To start the string trimmer, press the switch trigger.

To stop the string trimmer, release the switch trigger.
CAUTION: Inspect area to be trimmed and remove any wire, cord, or string-like objects
which could become entangled in the rotating line or spool. Be particularly careful to avoid
any wire which might be bent outwardly into the path of the tool, such as barbs at the base of
a chain link fence.
If you strike or become entangled with a foreign object, stop tool immediately, check for damage and
have any damage repaired before further operation is attempted. Do not operate with a broken hub or
spool.
WARNING: Do not allow familiarity with this type of product to make you careless.
Remember that a careless fraction of a second is sufficient to inflict serious injury.
CAUTION: Lines coasts after turn off. Do not use under wet conditions. Do not use with
damaged extension cord.
WARNING: Stones, pieces of metal and other objects can be thrown out at high speed by
the line. The unit and guard are designed to reduce the danger.
WARNING:
To guard against injury, observe the following:
Read instruction manual before using.
Save instruction manual.
Keep hands away from lines.
Keep hands on handles. Don’t overreach.
TELESCOPING SHAFT

The shaft can be extended or shortened for ease of use. Unplug the string
trimmer.

Unscrew telescoping shaft locking collar and slide to desired position.

Tighten telescoping shaft locking collar.
Fig.4