Powersmart PS6300, Инструкция по эксплуатации

Страница: 7 / 27

7
 Only use safety equipment that has been approved by an appropriate standards agency. Unapproved
safety equipment may not provide adequate protection. Eye protection must be ANSI-approved and
breathing protection must be NIOSH-approved for the specific hazards in the work area.
POWER TOOL USE AND CARE
 Know this tool. Read manual carefully, learn its applications and limitations, as well as the specific
potential hazards related to this tool.
 Check for misalignment or binding of moving parts, breakage of parts, and any other condition that
may affect the power tools operation. If damaged, have the power tool serviced before using. Many
accidents are caused by poorly maintained tools.
 Do not force power tool. Use the correct power tool for your application. The correct power tool will
do the job better and safer at the rate for which it is designed.
 Maintain tools with care. Keep tool clean. A properly maintained tool, reduces the risk of binding
and is easier to control.
 Store idle power tools out of reach of children and other untrained persons. Power tools are
dangerous in the hands of untrained users.
 Check operation of the tool before use. Do not use the tool if the workpiece contact mechanism is not
working correctly as accidental driving of a fastener may occur.
 Do not use the power tool if switch does not turn it on or off. Any power tool that cannot be
controlled with the switch is dangerous and must be repaired.
 Keep the tool and its handle dry, clean and free from oil and grease. Always use a clean cloth when
cleaning. Never use brake fluids, gasoline, petroleum-based products, or any strong solvents to clean
your tool.
 Do not operate the tool if it does not contain a legible warning label.
 Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into
account the working conditions and the work to be performed. Use of the power tool for operations
different from those intended could result in a hazardous situation.
 Save these instructions. Refer to them frequently and use them to instruct others who may use this
tool. If you lend this tool to someone else, also lend them these instructions.
SERVICE
 Tool service must be performed only by qualified repair personnel. Service or maintenance
performed by unqualified personnel could result in a risk of injury.
 When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance
section of this manual. Use of unauthorized parts or failure to follow Maintenance Instructions may
create a risk of electric shock or injury.