Powersmart PS6300, Инструкция по эксплуатации

Страница: 17 / 27

17
 The spray gun should be held 12-14 inches away from the surface and held at a 90° angle from the
surface area.
CLEAN UP
WARNING:
Cleaning the sprayer after each use results in a trouble free start up the next
time the sprayer is used.
Clearing spray tip
Occasionally, the Spray Gun Tip will become clogged with paint. Follow these instructions to clear Spray
Gun Tip.

Switch power off and set Trigger Lock.

Adjust nozzle to clean setting.

Turn Spray/ Prime Switch to Spray mode.

Turn power on.

Unlock Trigger.

Spray into water bucket until clog clears.

Release Trigger and engage Trigger Lock.

Adjust nozzle to Spray mode.
Cleaning
1. Relieve pressure and drain paint from Tubes.
2. Separate tubes.
3. Place Priming Tube in empty waste bucket.
4. Submerge Suction Tube in water or flushing
fluid.