Powerplus POWXG1018 Скачать руководство пользователя страница 4

Страница: 4 / 22

POWXG1018

P a g e

www.varo.com

3 PACKAGE CONTENT LIST



Remove all packaging materials.



Remove remaining packing and package inserts (if included).



Check that the package contents are complete.



Check the appliance, the power cord, the power plug and all accessories for transportation
damage.



Keep the packing materials as far as possible till the end of the warranty period. Dispose it
into your local waste disposal system afterwards.

WARNING: Packaging materials are not toys! Children must not play with
plastic bags! Danger of suffocation!

1 x Gasoline chainsaw 49.3cc

18”

1 x Manual
1 x Chain

1 x Bar
1 x Bar sheath
1 x Tool kit

If any parts are missing or damaged, please contact your dealer.

4 SYMBOLS

In this manual and/or on the machine the following symbols are used:

Read the user manual before
using the machine.

Wear gloves to protect your
hands

Mandatory use of eye
protection.

Wear safety boots to protect
agains electric shock

Wear noise protection

Make Sure the Chain Brake
is disengaged! Pull Hand
Guard/Chain Brake back to
run.

Warning! Danger

Read this manual carefully before using the machine, for your own safety.
Your power tool should only be passed on with these instructions.

Only use Bio degradable oil (environment-friendly) to lubricate the chain

5 SAFETY



DO NOT operate a chain saw with one hand! Serious injury to the operator, helpers,
bystanders, or any combination of these persons may result from onehanded operation. A
chain saw is intended for twohanded use.



DO NOT operate a chain saw when you are fatigued, under the influence of drugs, alcohol
or medication.



Use safety footwear, snug-fitting clothing, protective gloves, and eye, hearing and head
protection devices.

Содержание POWXG1018























Результаты поиска

Содержание POWXG1018

Отзывы:

Похожие инструкции для POWXG1018

Бренды по названию

Популярные бренды

Powerplus POWXG1018, Руководство пользователя

Результаты поиска

Содержание POWXG1018

Отзывы:

Похожие инструкции для POWXG1018

Бренды по названию

Популярные бренды