www.powermaxfitness.net
16
Notice:
Periodically clean the impurities in the belt groove and the belt wheel groove.
6.
Treatment method of running belt slip or pause
First open the front motor cover, then open the treadmill, hold the hand grip with both
hands, step on the belt hard with your feet, watch it is the conveyor belt of the motor that
pauses or the running belt that pauses. If running belt pauses, adjust the running belt, while
if conveyor belt of the motor pauses, adjust the motor.
FREQUENTLY ASKED QUESTIONS
Fault Code Main reason
Solution
E01
The wire from computer to
bottom control board didn’t
connected well
•
Check the connection wire between
computer and control board was well
connected.
•
Make sure the IC on the control board
was well inserted. If not re-insert.
•
Abnormal power supply in control
board. Please change a new control
board.
E02
Protect the exploding
•
Bad contact with motor open circuit.
Please change a new motor or check the
connector.
•
Power tube was puncture. Please
change a new Power tube or control
board.
E05
Over current Protection
•
Overloaded
。
•
Running board with heavy resistance.
Need to be oiled
•
Damage in Motor. Change a new motor.
E06
Control board self-checking
E08
EEPROM damage
•
Change the control board
