www.powermaxfitness.net
14
6. PRODUCT MAINTENANCE
Lubricating
The running belt must be lubricated with specially configured methyl silicone oil after used for a
period of time.
1.
Advice:
When use time a week is less than 3 hours, it should be lubricated once in five months.
When use time a week is between 4-7 hours, it should be lubricated once in two months.
When use time a week is more than 7 hours, it should be lubricated once in one month.
It can’t be over-lubricated. It is not the more lubricant, the better. Remember: proper
lubricating is the important factor to increase the treadmill’s service time.
2.
Lubricating methods
For the methods to examine whether it is needed lubricant, you only need catch up the
running belt and touch the central part of the back of the belt with hand as nearly as
possibly. If the belt is with silicon resin (a bit sense of dampness) inside, this means no
lubricant is needed; if the running board is dry and you feel no silicon resin inside, this
means lubricant is needed.
A.
Steps for coating the running board with lubricant: (see the picture)
B.
Stop the rotation of the running belt and fold the machine.
C.
Pick up the belt of the back of the body frame: stretch the oil holder as nearly as
possible into the moving place of the belt, coat the inner side of the belt with silicone
oil and coat both sides of the belt with silicone resin, and then operate the treadmill
at the speed of 1K M/H so as to evenly coat the silicone resin; and step on the belt
from left to right for a few minutes, then the silicone resin will be completely
absorbed by the belt.