Powermatic 1200HD, Инструкция по эксплуатации и перечень запасных частей

Страница: 5 / 32

5
Machine Capacity. Do not attempt to use the machine beyond its stated capacity or for operations requiring
more than the rated horsepower of the motor. This type use will reduce the productive life of the machine and
could cause the breakage of parts which could result in personal injury.
Avoid Accidental Starting. Make certain the motor switch is in the "off" position before connecting power to
the machine.
Careless Acts. Give the work you are doing your undivided attention. Looking around,carrying on a conver-
sation, and "horseplay" are careless acts that can result in serious injury.
Job Completion. If the operator leaves the machine area for any reason, the drill press should be turned off
and the spindle come to a complete stop before he departs. In addition, if the operation is complete, he
should clean the machine and work area. Never clean the machine with power on and never clean chips with
the hands; use a brush or chip rake.
Disconnect Machine before performing any service or maintenance and when changing tools.
Replacement Parts. Use only Powermatic or factory authorized replacement parts and accessories; other-
wise, the drill press warranty and guarantee will be null and void.
Misuse. Do not use the 1200HD Drill Press for other than its intended use. If used for other purposes,
Powermatic disclaims any real or implied warranty and holds itself harmless for any injury that may result
from the use. Do not equip a 1200HD Drill Press with a motor larger than 2 horsepower nor with a motor with
a speed greater than 1800 rpm unless specifically authorized to do so in writing by Powermatic.
If you are not thoroughly familiar with the operation of drill presses, obtain advice from your supervisor,
instructor or other qualified person.
Drugs, alcohol, medication. Do not operate this machine while under the influence of drugs, alcohol, or any
medication.
Health hazards. Some dust created by power sanding, sawing, grinding, drilling and other construction
activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are:
* Lead from lead-based paint.
* Crystalline silica from bricks and cement and other masonry products.
* Arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your
exposure to these chemicals, work in a well-ventilated area, and work with approved safety equipment, such
as those dust masks that are specifically designed to filter out microscopic particles.
Familiarize yourself with the following safety notices used in this manual:
CAUTION: (This means that if precautions are not heeded, it may result in minor or moderate injury
and/or possible machine damage)
WARNING: (This means that if precautions are not heeded, it could result in serious injury or
possibly even death).
!
!