18
The most common fault
Warning!
Before any intervention in the welding machine, disconnect the unit from the mains. PROBLEM
Warning!
Before any intervention in the welding machine, disconnect the unit from the mains. PROBLEM
CAUSE
SOLUTION
No voltage outputs
devices
No voltage at the output terminal
After cooling unit,
try to weld.
Inclusion
security
overload
When the power switch device
does not turn on
Damaged
line
control
Please contact an authorized
service center
Defective control board
Service
Repair welding equipment should be carried out by qualified personnel using original spare parts. This ensures the
safety of the device.
REMOVAL OF USED
End of life do not dispose of this product by normal household waste, but take it to a
collection point and recycling of electrical and electronic equipment. This is indicated by the
symbol on the product,
user manual
or packaging. Thanks
re-use, material utilization or other forms of old appliances, you make an important
contribution to protecting our environment.
COMPANY DETAILS
PH Powermat TMK Bijak Sp. General Partnership Ul.
Defenders of the Gdansk Post 97 42-400 Zawiercie
