8
ABOUT MARKING THE PIS LABEL
ABOUT MARKING THE PIS LABEL
ABOUT MARKING THE PIS LABEL
Current (DC)
Symbol
single phase alternating current (AC) of the rated frequency 50Hz
and 60Hz operating frequency.
AT
1
Nominal input voltage (AC)
AT
1
Nominal input voltage (AC)
AT
1
Nominal input voltage (AC)
AND
1max
Maximum input current
AND
1max
Maximum input current
AND
1max
Maximum input current
AND
1EFF
Effective input current
AND
1EFF
Effective input current
AND
1EFF
Effective input current
AT
0
No-load voltage (load voltage)
AT
0
No-load voltage (load voltage)
AT
0
No-load voltage (load voltage)
AND
2
output current
AND
2
output current
AND
2
output current
AT
2
The output voltage under load
AT
2
The output voltage under load
AT
2
The output voltage under load
X
welding cycle
(This percentage ratio of working time under load to full duty cycle)
•
The value of 0-100%
• Standard for this device, one full cycle is 10 min. For example, 40% of the
cycle allows for continuous welding under load for 4 minutes. and the time
to "rest" should last 6 minutes. When the time under load the machine is
switched off by the thermal fuse.
The device welded single-phase DC
Welder is used for MMA welding
SIMPLIFIED INSTRUCTIONS FOR USE
Assembly welding mask
Welding mask assembly is performed according to the diagram.
