Installing the PL-Pro/II
17
PowerLeap
�
Installation Guide
2. Firmly press the CPU into the adapter socket. The CPU should be pushed
into the socket far enough so that there is no gap between the CPU and the
socket (the CPU pins should not be visible).
Â
To install the PL-Pro/II upgrade adapter in your
computer:
1. Place your computer where you will have plenty of space to work.
2. Turn the computer off and disconnect all power cords and cables from
the rear of the computer.
3. Remove the cover from the computer (as described in the computer
documentation).
4. Locate the CPU ZIF socket on the computer�s motherboard. The CPU itself
may be concealed underneath a CPU cooling fan and/or heatsink.
5. If your computer has a CPU heatsink/fan, remove it.
6. Lift the ZIF socket arm and remove the CPU from the ZIF socket.
Figure 12. Removing the Pentium Pro CPU
