16
Installing the PL-Pro/II
PowerLeap
�
Installation Guide
PPGA Celeron Installation
This section describes installing a PPGA Celeron CPU in your PowerLeap�
PL-Pro/II upgrade adapter, installing the adapter in your computer, and attaching
the provided CPU heatsink/fan.
Â
To install a PPGA CPU in the PL-Pro/II upgrade adapter:
1. Align the CPU with the adapter so that pin 1 occupies the corner of the
adapter diagonally opposite the adapter�s fan power cable. The pin 1 corner of
a CPU is usually indicated by a dot and/or beveled edge.
Figure 11. Aligning the CPU with the adapter.
Note: You must install the CPU so that its pin 1 corner
corresponds to the pin 1 corner of the adapter (which is
diagonally opposite the adapter�s fan power cable).
