Brush Attachment
The brush attachment can be used after the soap foam sprayer. For
best results, spray with the soap foam sprayer first, let soak for a few
minutes, then switch to the brush attachment. It is effective on cars
and boats, and cleaning stains from concrete patios, vinyl siding, or
wood decks.
After Use Instructions
The washer and accessories should be stored in a room that is 60-80
degrees (never store in a room that will freeze or outside).
Pump, hose, and accessories should always be dry prior to storing:
1. Step on the power switch (11) to turn off the washer and detach
the water hose after shutting off the water supply.
2. Restart the washer (step on the power switch (11)) and press the
trigger of the trigger gun (4). Let the washer run until no more wa-
ter runs through the trigger gun.
3. Step on the power switch (11) to turn off the washer and remove
the high pressure hose (2) and nozzle (6/7/8). Detach the high-
pressure hose by pressing the quick release button on the trigger
gun and the high-pressure hose quick connector (3).
Caution: When you detach the high-pressure hose, be sure you have
released the water pressure by turning off and disconnecting garden
hose and expelling remaining water
from the washer by depressing the
trigger. This will enable disassembly.
4. Unplug, and wind up hose.
5. As shown at right, store trigger
gun (4), lance (5), nozzles
(6/7/8), and other accessories in
storage pins (13) and holders on
the washer.
WARNING: Never start up a frozen washer. Frost damages are
not covered by our warranty!
12