Attach the Wheels
Snap the wheels (1) onto the washer.
Connect the High-Pressure Hose
Press the button on the high-pressure hose (2) quick
connector (3) at the front of the washer (see diagram
at left) and snap in the hose.
Attach the Trigger Gun
As indicated in the diagram at
right, attach the high-pressure hose to the
trigger gun (4) by pressing it into the connect-
or. You will hear and feel a click.
Attach the Lance
As shown at left, push the lance (5)
into the trigger gun (4). When insert-
ed, turn it until it locks in place.
Caution: Make sure the lance is
properly attached to the gun.
Attach a Nozzle
When attaching the nozzle, the button ((A) in the diagram above) on
the nozzle should pop out again. Check before pressing the trigger
that the nozzle is properly inserted and the button has popped back
out. You must line up the indents on the nozzle for it to connect cor-
rectly.
The Force 1800 pressure washer comes with
three different nozzles, as shown in the pic-
ture at right. From top to bottom, the Angle
Nozzle (7), the Turbo Nozzle (8), and the Mul-
ti-Function Nozzle (6). Each is described be-
low.
7