Do not cover the washer during operation!
Stopping the Washer
Note: The washer must be switched off, using the foot power
switch (11), when left unattended or not used:
1. Step on the power switch (11) to turn off the washer.
2. Disconnect the electrical plug from the socket (do not pull cord).
3. Shut off the water supply.
4. Press the trigger to relieve the washer of pressure.
5. Lock the trigger gun safety.
When releasing the trigger of the trigger gun, the washer motor auto-
matically stops. The washer motor will start again when you re-press
the trigger of the trigger gun.
Cleaning Attachments
Soap Foam Sprayer (12)
Unscrew the container (A) from the foam sprayer.
Add soap to the container and screw the container
to the foam sprayer. Adjust the amount of soap
with the knob (B).
Note: Adjust the foam spray with Knob B. If you
want to spray water only, turn it to close.
The soap sprayer is equipped with a quick connect-
or. Press C, then insert into the lance (5).
Since the soap output is adjustable, the bottle has
air intake holes at the top. It will leak soap if it is not upright. To avoid
this, store the soap bottle on the pin on the back of the washer (13) in
the upright position when not in use.
Caution: When attaching the soap bottle, the button (C) should pop
back out. Check before pressing the trigger that the nozzle is properly
attached.
11