Operation
16
1. Pre-start Check List & Procedures
WARNING: High Energy Machine
This is a high-powered machine. It has moving parts operating with high energy and at high speeds. Safe
procedures must be used to avert serious injury or death. Unsafe operation will create serious hazards for
you, as well as anyone else in the nearby area.
CAUTION: Add Oil to New Engine
A new engine is shipped without oil. Add engine crankcase oil to a new engine.
You must add the
correct amount of oil to engine crankcase or engine will be damaged beyond repair.
Each time you get ready for a chipping/shredding session and before starting the engine you should
follow these items:
Check/Add Engine Oil
Fill Engine Gasoline Tank
Inspect Fuel System for Leaks
Wear Personal Protection
Establish Safe Working Area
Remove Hazardous Chipping Materials
Only Work During Daylight
Each of these procedures is discussed below and in the engine manual.
Check/add oil
Check the oil level using the dipstick and add oil as needed daily.
Using a funnel, add oil up to the Max Upper Level.
(See engine Owner’s Manual for oil type and capacity, and more detailed oil
check/fill instructions.)
WARNING: Burn hazard
Never open the oil fill port while engine is running. Hot oil can spray over
face and body.
Содержание M16620D
