Powerhorse M16620D, Руководство пользователя

Страница: 17 / 44

Operation
17
Fill
chipper/shredder
fuel tank(s)
Check the fuel level in the chipper/shredder’s fuel tank.
If needed, fill tank with fresh fuel from a portable container, after first
reading the following warnings and instructions.
Do NOT fill the fuel tank to the top. Fuel may spill when operating on a
slope.
Do NOT overfill the fuel tank. Allow at least 1in. of empty space below the
fill neck to allow for fuel expansion.
WARNING: Gasoline fire/explosion hazard
Gasoline is highly flammable and explosive. Heat, sparks, and flames can ignite
gasoline vapors, which can become widespread during fueling. A flash fire
ignition and/or explosion could result and cause serious injury or death. The
following conditions could result in gasoline ignition/explosion:

Gasoline vapor collection inside enclosures

Static electric sparks

Sparks from electric wiring, batteries, or running engines

Sources of heat (such as a hot engine or exhaust)

Open flames, including pilot lights
Inspect Fuel System
for Leaks
Inspect fuel system & check for leaks BEFORE starting chipper/shredder.
WARNING: Fuel leak hazard
A leaking fuel line no matter how small can be the source of a fire or explosion
when starting or operating the engine.
Look for: Signs of leaks or deterioration, a chafed or spongy fuel hose, loose
connections, loose or missing fuel hose clamps, a damaged gasoline tank, or
a defective gasoline shut-off valve.
If chipper/shredder is in an enclosed area and you smell gas, DO NOT start
engine! DO NOT light a match. DO NOT flip on an electrical switch. Exit
area immediately leaving doors open and call fire department for assistance.
Wear Personal
Protection
Use approved protective clothing and approved protective equipment when
using the machine.

Wear ANSI-approved and OSHA-compliant safety glasses with side
shields and a hard hat.

Use earplugs or another hearing protection device if working within 15-
20 feet of the running chipper/shredder for longer than a few minutes.
Hearing can be damaged from prolonged close-range exposure to the
type of noise produced by this chipper/shredder.

Wear long pants to protect legs from flying debris and hot engine.

Wear gloves with no cuffs.

Never wear jewelry or loose-fitting clothing when starting or operating
the chipper/shredder or any mechanical device. Loose or dangling
apparel, jewelry or hair can become entangled in moving parts.